Mouldy Silicone in Dubai: When to Reseal, Not Clean

If the black spots in your bath or shower silicone come back within days of cleaning, the mould is growing inside the sealant, and no cleaner will reach it. The fix is to reseal: cut out all the old silicone, clean and dry the joint, then apply a fresh bead of mould-resistant sanitary silicone. A typical bathroom takes a few hours, and the new seal needs about 24 hours before it gets wet.


Silicone joints are small, but they do two jobs: they make a bathroom or kitchen look clean, and they stop water getting behind baths, shower trays and worktops. In Dubai bathrooms, with steamy showers, hard water and air conditioning running all day, silicone ages faster than most people expect. This guide explains how to tell when silicone needs replacing, why cleaning isn't enough, and what a proper resealing job involves.


Signs your silicone needs replacing


  • Black or grey spots that won't clean off. Mould has grown into the silicone itself.

  • Gaps, cracks or peeling edges. The seal has lost its grip, so water can get behind it.

  • Yellow or orange staining. Old silicone discolours with age, soap and limescale.

  • Water marks on the ceiling below, or a damp bath panel. Water is getting past the seal. Have this checked quickly, as it can damage what's underneath.

  • Silicone applied over old silicone. A second layer on top of the first never bonds properly and usually fails within months.


Why cleaning mouldy silicone doesn't work


Silicone is slightly porous. Once mould spores settle in a joint that stays damp, they grow into the sealant rather than sitting on top of it. Bleach and mould sprays can lighten the surface for a while, but the roots stay in the silicone and the spots return. If the marks are under the surface, the only lasting fix is to remove that silicone completely.


Prevention helps the new seal last longer: run the extractor fan during and after showers, squeegee the tray and screen, and leave the shower door open to dry. Even so, silicone in a busy bathroom is a maintenance item that needs renewing every few years.


Where silicone fails most in Dubai homes


Baths and shower trays


The joint between the bath or tray and the wall tiles moves slightly every time it's filled and someone steps in. That movement, plus constant water, makes it the first joint to fail. If an acrylic bath is also chipped, it can be repaired at the same visit; see our bath, shower and sink repair service.


Basins and vanities


Silicone around basins and vanity tops collects soap, toothpaste and hard water deposits, and turns yellow or black along the back edge.


Kitchen worktops and sinks


The joint along the back of the worktop and around the sink keeps water out of the cabinets below. Failed silicone here can lead to swollen cabinet panels, which is a far bigger repair than a reseal.

Fresh silicone being applied beside old mouldy silicone along a white bath

How professional resealing works


  • Remove all the old silicone. It's cut out and the residue is cleaned off the tiles, bath and worktop. New silicone won't bond to old silicone.

  • Treat and dry the joint. Any mould in the gap is treated and the joint is left fully dry. Sealing a wet joint traps moisture and the mould comes back.

  • Mask and apply. Mould-resistant sanitary silicone is applied in one continuous bead, in white, clear or a colour to match your grout or worktop.

  • Tool to a clean finish. The bead is smoothed to a neat, even line that sheds water.

  • Cure. Most sanitary silicones need around 24 hours before the bath or shower is used. Fill the bath with water before sealing it, so the joint is set at the bath's lowest position.


Matching the colour of your silicone


Silicone doesn't have to be white. We can match the colour you need, whether it's grey to match the grout, beige next to stone, black against a dark worktop or clear on glass. A matched joint looks deliberate rather than patched.


Is resealing worth it in a rental or holiday home?


For landlords and holiday-home hosts, fresh silicone is one of the cheapest ways to make a bathroom look clean in listing photos and at check-in. Old, stained silicone is also a common item on move-out inspections. If you're preparing a property between tenants, see our guide to move-out damage repair. Stained grout often goes with tired silicone; our grout repair guide covers that.


What affects the cost of resealing


We price every job from photos rather than quote a single figure for everyone. The main factors are:


  • Number of joints: a single bath is quicker than a full bathroom with bath, shower tray, basin and vanity.

  • Condition of the old silicone: thick, layered or heavily stuck silicone takes longer to remove cleanly.

  • Mould and moisture: joints that need treating and drying before sealing take extra time.

  • Colour: a matched colour is no problem, but let us know in advance so we bring the right one.

  • Several bathrooms in one visit: resealing a whole apartment or villa costs less per joint than separate visits.


Send clear photos, one close up and one from further back, and we'll give you a fixed price before any work starts.


Frequently asked questions


How long does silicone last in a bathroom?


It depends on how much the bathroom is used and how well it's ventilated. In a busy Dubai bathroom, silicone often needs renewing every few years, and sooner if it starts to peel or the mould spots come back after cleaning.


Can you put new silicone over old silicone?


No. New silicone doesn't bond properly to old silicone, so the joint fails quickly and traps mould underneath. The old sealant has to be removed first.


How long before I can use the shower after resealing?


Most sanitary silicones need about 24 hours before they get wet. We'll tell you the exact time for the product we use on your job.


Do you reseal in Abu Dhabi?


Yes, we cover Dubai and Abu Dhabi.


Send a photo of your silicone on WhatsApp and we'll tell you the same day whether it needs resealing, with a fixed price. See our silicone sealing and resealing service for more detail.

Need a repair? Contact Pro Surface Magic today for a same-day assessment across Dubai and Abu Dhabi.